ZHEJIANG KAYO MOTOR CO., LTD.
-
3.5
Wheel
With the atv on a jack of atv lift. Lift the
front wheels off the ground. Push and
pull the wheel in and out as shown in the
diagram.
If there is movement, check torques on
hub, steering shafts, spindles.
If there is still movement, check the
bearings, ball joints, a-arm bushings.
Replace if worn or damaged.
。
Front wheel size
On a level surface with handle bars straight check the front wheel toe -in. The front
wheel relative to the forward direction of the vehicle is: A in front and B behind
the wheel
Toe-in specification
：
A-B=1.5 ~ 2.5mm
If not in this range, adjust steering rods, adjust the wheel toe-in to within 4~10mm,
and lock into place.
Note:
after the adjustment of front toe-in, drive the vehicle slowly and make sure
vehicle tracks straight and true. After test ride check measurement again to make
sure toe in is locked into place.
