4-1
ZHEJIANG KAYO MOTOR CO., LTD.
·
Choose special tools as specified in the maintenance manual.
·
Ensure that parts used in assembly are clean and lubricated where required
.
·
Use special lubricants, binders and sealants.
·When fastening bolts, screws and nuts, tighten from large to small, and tighten
from inside to outside according to the specified torque.
·Use a torque wrench to tighten the torque required bolts, Always clean grease and
oil from threads. Used thread locker where necessary
·Clean the disassembled parts before inspection a nd measurement.
·After assembly, check the fastening torque and running status of
components.
·Do not re-use any removed oil seals, O -rings, gaskets, locking nuts,
lock washers, cotter pins, elastic baffle and other parts
.
