ZHEJIANG KAYO MOTOR CO., LTD.
WWW.RIDEKAYO.COM
1.
Apply a layer of sealant evenly on the
right crankcase, attach the locating pin to
the corresponding hole in the left
crankcase, and then join the right box to
the left box. install
five”GB/T16674-M6×45” and eight
“GB/T16674-M6×65” into left crankcase
holes and tight.tighten torque
：
11
～
13
N·m.
2. install oil filter parts to the specific
body holes.
Note:
：
Oil filter opening side faces to left body.
install the filter cap to two-head bolts,
then tight with two “GB/T6177.1-M5”
nuts, tighten torque:7
～
9 N·m.
3.
Install the oil filter screen assembly
into the specific holes of left and right
bodies, then tight with filter screen cap,
tighten torque:11
～
13 N·m.
Opening of oil filter, faces left tank
