ZHEJIANG KAYO MOTOR CO., LTD.
WWW.RIDEKAYO.COM
If it
’
s caused by steering column, tighten the bottom lock nut on steering column, or
you can also disassemble the steering column to check bearing and clamps.
Keep vehicle in steady place and turn the handlebars slowly making sure movement is
smooth.
If it is hard to turn, check cable, hose and wire routing, if there is no problem, check
steering rods and connecting points for damage.
Note: the steering must be smooth, and move freely between left locked position
to right locked position .
Steering system free-play:
Check movement before operation. Free-play in steering
should be 5-10mm.
Brake pump assembly
Check the fluid level at the sight glass on the master cylinder. If brake is below the
lower limit, stop using the vehicle immediately and inspect for leaks at master
cylinder, hoses, fittings and connections. If fluid is low remove top of master cylinder
and add DOT4 brake liquid to limit position.
