ZHEJIANG KAYO MOTOR CO., LTD.
WWW.RIDEKAYO.COM
1.1 Safety precautions
Safety first
1.
Wearing work clothes (coveralls), hat and safety boots suitable for the operation.
In some conditions safety glasses, dust masks, gloves and other safety protective
supplies are needed to protect you from injury.
2.
Do not run the engine in unventilated places.
3.
To prevent burns, do not touch the engine or exhaust until cooled.
4.
Battery solution (dilute sulfuric acid) is a strong corrosive agent; contact with the
skin, contact with eyes may cause blindness. If the battery solution accidentally
touches clothes or skin, rinse immediately with clean cold water. If the battery
solution is touches eyes, please flush immediately with plenty clean cold water and
get medical treatment as soon as possible. Battery and battery solution should be kept
out of reach of children. Battery charging will produce flammable and explosive gases,
if exposed to a source of fire or spark there is a risk of explosion or fire. Please charge
in well-ventilated places.
5.
As gasoline is flammable and explosive. Pay attention to sparks as well as open
flames. Vaporized gasoline may explode if exposed to open flame or sprks , please
choose well-ventilated areas away from these hazards when refueling.
6.
Attention, the rear wheel, clutch or sprockets and other rotating parts and
movable parts as hands and clothes may be caught during maintenance.
Disassembly and installation precautions
1.
All Parts, lubricants oils and fluids must be Kayo brand parts or Kayo recommends.
2.
During disassembly, Please sort and separate out the parts and fasteners of each
system to ensure that everything is put back together properly.
3.
Clean the vehicle or parts to be serviced before inspection.
4.
Gaskets, o-rings, piston pin, piston ring, cotter pin and other one time use parts
must be replaced after disassembling.
5.
Snap rings can be deformed if opened too much during disassembly. DO NOT
re-use deformed snap rings.
