ZHEJIANG KAYO MOTOR CO., LTD.
WWW.RIDEKAYO.COM
Right body oil pump assembly
1.
Put the oil pump pin into hole of oil
pump shaft.
2.
Install rotors assembly on right body
hole, and fix the oil pump cover plate on
oil pump rotors with 3
“GB/T16674-M5×18” bolts.
Note:
1.
When install rotors, the outer
and inner mark sides should in the
same direction.
2.
The tighten torque of oil pump
cover plate is: 7
～
9
N.m
；
3.
Make sure the oil pump shaft
works well.
3.Install oil pump gear assembly on oil
pump, then install ring”GB/T894.1-10”
on the rand groove.
4.install the bridge gear washer to bridge
gear shaft, then install bridge gear on
bridge gear shaft, install bridge gear
washer to bridge gear, at last install ring
“GB/T894.1-10” on the groove of oil
pump bridge gear shaft.
Overshoot clutch assembly
Install the block on overshoot clutch cover.
