![background image](http://html1.mh-extra.com/html/kayo-motor/t2/t2_service-manual_3706426019.webp)
ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.us
- 18 -
6.
brake disc’s abrasion of brake system
Check for damage to the brake disc surface, (scratches, gouges, warping,
bluing) and check the thickness, if the brake disc is less than the limit
thickness, the brake disc must be replaced immediately.
Limit thickness of brake disc:
Front MIN=3.5mm
Rear MIN=3.5mm
7.Check tire pressure
Use the pressure gauge to check whether the tire pressure level is in
specification,
Recommended pressure: front 2.23 bar (2.23 kgf /cm2); rear 2.77bar (2.77
kgf /cm2).
Note:
the tire pressure check should be done under cool conditions. Riding
with over or under inflated tires will affect operation and ride comfort and
may result in irregular tire wear and loss of control
8.
Check spoke tension
Pinch the two adjacent spokes with your fingers to check whether there is a
lack of tension in the spokes. If the spokes are found loose wheel truing and
tightening may need to be performed..
NOTE: spoke tensioning and truing should be performed by a professional
9.
Check the chain and its supporting parts
Check chain tension. If the chain is too loose, it can be adjusted by loosening
the rear axle and adjusting the chain adjusters. Do not make the chain too
tight.
Note:
if the chain needs to be tensioned frequently, or if you find any signs
of wear on the front sprocket, rear sprocket and chain replace immediately.
Summary of Contents for T2
Page 1: ...ZHEJIANG KAYO MOTOR CO LTD www kayomoto us KAYO MOTO T2 SERVICE MANUAL W W W K A Y OMOTO US...
Page 13: ...ZHEJIANG KAYO MOTOR CO LTD www kayomoto us 12 Circuit diagram T2...
Page 14: ...ZHEJIANG KAYO MOTOR CO LTD www kayomoto us 13 T2 G...
Page 21: ...ZHEJIANG KAYO MOTOR CO LTD www kayomoto us 20...