Zhejiang Kayo Motor Co., Ltd.
8
Throttle Lever
The throttle lever is used for controlling the engine and ATV speed. Operate this Iever with your thumb. Push it
forward to increase engine and ATV speed. Release it to decrease engine and ATV speed.
Parking Brake
To set parking brake, squeeze front brake lever, press parking brake pin, set the parking brake lever.
Throttle Limiter Screw
When controlling the throttle, you should screw in the adjusting screw.
Using the throttle limiter screw to restrict maximum speed of the ATV. Adjusting this limiter according to the
rider’s skill and experience.
Adjusting procedures:
1.
Loosen the Lock nut.
2.
Turn the throttle limiter screw clockwise to restrict maximum speed of the ATV.
3.
Turn the throttle adjusting screw counterclockwise to increase the maximum speed of the ATV.
4.
After adjusting, tighten the lock nut.
Fuel Tank Switch
There are two positions: “ON","OFF".
“ON” position - In this position, fuel will flow into the carburetor when the engine is running or being started.
“OFF” position-Fuel will not flow into the carburetor.
Fuel Tank Cap
To open the fuel tank cap
，
take the end of the vent tube out from the vehicle body, needing to turn the fuel tank cap
counterclockwise
．
To close the fuel tank cap
，
turn in it clockwise and tighten it firmly. Be sure that the vent tube
securely connects to the cap.
