EN
8
Outer tent
1
Innter tent
2
Groundsheet
1
Tent poles
4
Steel rods for opening sheet
2
Guy ropes
12
Tent pegs
40
INSTALLATION
1. Spread out the outer tent with the floor
side facing down. Insert the four tent
poles in the relevant sleeves. Erect the
tent, then place the ends of the tent poles
in the corresponding pins (pins and rings)
in the corners of the outer tent.
FIG. 1
2. Secure the rings (pins and rings) at the
corners of the outer tent and the elastic
loops around the bottom of the outer tent
to the ground using the tent pegs.
FIG. 2
3. Hang up the inner tent inside the outer
tent using the hooks and rings. Secure the
D-rings at the four corners of both inner
tents to the ground using tent pegs.
FIG. 3
4. Tension the guy ropes evenly and secure
them to the ground using tent pegs.
The length of the ropes can be adjusted.
Place the groundsheet inside the tent
and secure it using tent pegs. Erect the
opening sheet using the steel rods.
FIG. 4
5. The tent should now look like this.
FIG. 5
SAFETY INSTRUCTIONS
The following safety precautions must be
implemented when camping.
• Do not use candles, matches or any other
naked flames in the vicinity of the tent.
• Do not cook food in the tent.
• Light any campfires several metres
downwind of the tent, and make sure that
the fire is properly extinguished before
leaving the campsite, or before going into
the tent.
• Take great care when using lamps or
heaters filled with fuel in the tent. If
possible, use
• battery-powered lights.
• Do not fill up lamps, heaters or stoves in
the tent.
• Turn off, or extinguish, all lights before
going to sleep.
• Do not smoke in the tent.
• Do not store any flammable liquids in the
tent.
SYMBOLS
Read the instructions.
TECHNICAL DATA
Size
120+140x140 cm
Weight
9,1 kg
Water column
2000 mm
DESCRIPTION
PACKAGE CONTENTS
Item
Qty.
Tent bag
1
Pole bag
1
Peg bag
1
Summary of Contents for 008787
Page 3: ...1 2 3...
Page 4: ...4 5...
