13
Fitting the child seat on the luggage carrier
1.
Place the child seat on the luggage carrier.
Insert the four M6 screws into the holes in
the child seat. Place the two metal plates
below the luggage carrier. Secure the
screws in the metal plates.
2.
Tighten the screws and check that the
child seat is correctly and securely
mounted. Secure the child seat to the rear
of the luggage carrier with a retaining
strap.
3.
Secure the child seat to the front of the
luggage carrier and the bicycle frame with
another retaining strap.
4.
Lift the child into the seat and adjust the
height of the safety belt and footrest. Then
adjust the foot straps.
MAINTENANCE
Clean the child seat with a mild detergent. Rinse thoroughly. Abrasive and/or corrosive cleaning agents
must not be used.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com
