EN
18
SAFETY INSTRUCTIONS
Read all the instructions and safety instructions carefully
before use, and familiarise yourself with the product before
connecting it to the gas cylinder. Save these Operating
Instructions for future reference.
• Check that the seals between the gas cylinder and the
product are tight and in good condition before connecting
the gas cylinder. Replace a seal immediately if it is damaged
or worn, otherwise the product must not be used.
• Do not use the product if it leaks, is damaged, or not
working properly.
• Place the product on a stable, level surface.
• Do not use the product near flammable substances, or near
a wall or roof.
• The gas container must be changed in a well-ventilated
location, ideally outdoors, and away from open flames and
other ignition sources. Keep onlookers and pets at a safe
distance. Never modify the product in any way. Repairs must
only carried out by an authorised service centre.
• In the event of a gas leak (smell of gas) take the product
outside immediately to find the leak. Leak tracing may only
be performed using soapy water, never with an open flame.
• The product is only intended for outdoor use.
• The product must only be used with propane, isobutane, or
a mixture of butane. Other types of gas cylinders can result
in a risk of personal injury and/or material damage.
• Accessible parts can be hot. For safety reasons it is
recommended to wear gloves. Keep children away from the
product.
• The product is only intended to be used with a screwed on
gas cylinder.
Summary of Contents for 956125
Page 4: ...1 2 ...
