22
Instruction manual for care bed „Ida 1.0“
Mounting doors
‡ CAUTION!
Moving parts. The doors may close and crush limbs or body parts.
Pay attention to your limbs.
13
14
1. Unfold a door (pos. 14) all the way.
2. Guide the opened door into the aluminium track of the connec-
ting rib using the guide pins. The stop profiles must be positioned
on the outside, while the guide pins must be facing down. This
automatically results in the finished door section.
3. Slide the door into the aluminium runner towards the correspon-
ding side frame (pos. 13). At the same time insert the grub screws
into the holes in the side frames (pos. 13).
4. Screw the brass caps (pos. 31) onto the grub screws and tighten
the brass caps.
Place and secure insert frame
1. Place insert frame (pos. 16) onto the support bars of the connec-
ting frames (pos. 18).
2. Ensure the head and foot sections are positioned accordingly
(KR2).
3. Remove the cable ties from the insert frame.
4. Screw the insert frame from inside to the connecting frames (pos.
18). Use the screws (pos. 81) and a battery powered screwdriver.
