FP function
LOCK function
O
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function(some units).
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
Silence function
Clean
5s
5s
Boost
Press this button 2 times during one second under HEAT Mode and setting temperature of
O
O
17 C/62 F or 20 C/(for models of
KID- 05.1 S
and KID-05 S
).
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
Note:
This function is for heat pump air conditioner only.
Press this button 2 times during one second under HEAT Mode and setting
temperature of 17 C/62 F or 20 C(for models of
KID- 05.1 S
and KID-05 S
) to activate
FP function.Press On/Off, Sleep, Mode, Fan and Temp. button while operating will
cancel this function.
2
+
Press together
Clean
button and
Boost
button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
2s
TURBO Function
Press TURBO button
Turbo
When you select Turbo feature in COOL mode, the unit will blow cool air
with strongest wind setting to jump-start the cooling process.
When you select Turbo feature in HEAT mode, for units with Electric heat
elements, the Electric HEATER will activate and jump-start the heating
process.
10
