background image

3

NOTICE

1.  Any load added to a bicycle will lessen the stability of the bicycle and alter its riding characteristics. Do not attempt 

to carry a load that is heavier than you can readily control. Match the load ot your weight, strength and size.

2.  Keep this instruction manual handy for reference when moving the bicycle child carrier to another bicycle or 

doing maintenance or makding adjustments to the bicycle.

3.  The bicycle, to which the child carrier is attached, must be in good working order, of a type appropriate for 

the additional load and of a proper size and adjustment for the rider. The cyclist should consult the 

information supplied with the bicycle or obtain information from the manufacturer or supplier of the bicycle 

to determine how to make the necessary adjustments. A properly sized and adjusted bicycle will improve 

both the comfort and safety of the ride.

4.  Before each use, check to determine that all fasteners are in place and secure. Check them frequently and 

ensure that they have not loosened due to vibration.

5.  Always remove the child carrier from the bicycle when the bicycle is being transported on a motor vehicle. 

This is necessary because the force of the high wind on the child carrier to the point where it may not 

perform reliably. This carrier has been designed for easy and rapid removal from the support bar assembly. 

When reattaching the child carrier, check all fasteners and tighten as required.

6.  Always remove the child carrier from the bicycle and store in a dry location when not in used. Child carrier 

should be stored indoors away from elements which may compromise the reliability of the carrier.

TIPS

1.  Carry extra clothing for your child, such as a windbreaker, sweater, etc. You are active while cycling; the 

child is inactive and may feel cooler than you do.

2.  Carry an air pump and repair kit, complete with all necessary tools, to repair a tire or tighten nuts, bolts, etc.

3.  Young children are very sensitive to the UV rays from the sun. You can reduce the damaging effects of the 

sun’s UV rays by wearing appropriate clothing, apply sunscreen lotions and wearing UV protective sunglasses.

ATTENTION

The responsible cyclist is the most important safety factor in the safe use of a bicycle child 

carrier. You are responsible for the safety and security of your child. Maintain awareneess of 

road and riding conditions at all times. Be attentive to the needs of the child. Check your 

bicycle and child carrier requrently to confirm that thtey are in safe operating condition and 

that all component parts are securely fastened.

ENGLISH

Pedestal

Pedestal

Seat Base

Seat 

Cushion

Pedestal

Seat Base

Foot Rest

Seat Bottom

Pedestal

 Bottom

Foot Rest 

Bottom

1.  Remove screw and washer from bottom of pedestal.

2.  Insert pedestal tabs into tab slots on front of child seat base.

3.  Turn seat and pedestal upside down and reinsert screw and washer through seat 

base and into bottom of pedestal.

NOTE: When securing hardware, apply normal hand tightening using the tools 

supplied/required. Torque requirement 10Nm.

PEDESTAL ASSEMBLY

Summary of Contents for WeeRide KANGAROO

























Reviews: