This warranty covers all defects in workmanship or materials for:
The mechanical and electrical parts contained in this product, for a period of 12 months, from the date of purchase. You must keep and be able to provide
your original sales receipt as proof of the date of purchase. This warranty is covered the original retail purchaser of this product. The manufacturer will repair
or replace, in your home, any mechanical or electrical part which proves defective in normal household use for a period of 12 months.
THIS WARRANTY DOES NOT COVER:
• Damages from improper installation
• Damages from shipping
• Damages from misuse, abuse, accident, alteration, lack of proper care and maintenance
• Damages from service by persons other than an authorized dealer or service center.
• Labor, ser
vice, transportation and shipping charges for the removal of defective parts and for installation of a replacement part, beyond the initial 12-month
period.
This warranty does not extend to fluorescent lamp starters and tubes.
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies. This warranty does not cover incidental or consequential
damages. Some states do not allow the exclusion of incidental or consequential damages, so this limitation may not apply to you. Some states do not allow
limitations on how long an implied warranty lasts, so this limitation may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.
Install ceiling material to complete the ceiling construction. Then, cut around the fan housing.
First insert the sensor plug into the plug base on the power box, and then install the grille (for model SE90TM
and SE90TMH).
To attach the grille assembly to the fan housing, pinch the grille springs on the sides of the grille assembly, and
position the grille into the housing with the grille springs in the appropriate slots. Push the grille assembly towards
the ceiling to secure.
WARRANTY
CONNECT ELECTRICAL WIRING
INSTALL GRILLE
SERVICE PARTS
6
7
d
e
a
1
2
3
4
5
b
c
8
10
9
11
11
12
PART
PART NAME
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
a
b
c
d
e
Housing
Damper / Duct Connector
Wiring plate
Screw
Blower Wheel
Wire Panel / Harness Assembly
Motor
1
1
2
1
1
1
1
1
1
1
1
1
4
1
4
4
1
4
1
Isolator
Motor Plate
Washer
Nut, Hex Lock
Grille Assembly (includes part 1 & 3)
Motion system (for SE90TM SE90TMH)
Grille Spring
Hanger Bar Kit
Screw
Humidity Sensor System (for SE90TH )
Power box(for SE90TM and SE90TMH)
Power box(for SED110)
* Blower Assembly includes part 7
，
6, 5, d, c, b, a.
Replacement installation:
Remove the screw (part c), then take out the motor plate (part 5) from
the housing (part 10) by pushing down the rib in the plate while pulling
out on the side of the housing. Replace the broken parts.
4
WARNING:
Before replacing, be sure to turn off power at power source.
UNIT
BLACK (BLK)
SWITCH BOX
SWITCH
I
POWER SUPPLY
120V AC
GROUND (GRD)
WHITE (WHT)
FAN
RECEPTACLE
FAN
WIRE
PANEL
BRN
BLK
SWITCH
I
SWITCH
II
SWITCH
II
BROWN (BRN)
for model SED110
