background image

ii

▪ Please use my products under your own responsibility. I will not take any responsibility 

over any loss, accidents, or injury caused by my products.

▪ My products are not toys. These are not designed for children. Keep children away 

from the engine and its accessories. Misuse of my product might cause serious acci

-

dents or injuries. Please use my product after reading the instruction manual and under

-

standing well.

▪ You should obtain Liability Coverage for the Operation of Model Aircraft before using 

my product on a RC aircraft. Also I strongly recommend that you join a radio control 
club and follow their instructions.

▪ My products are made only for RC aircraft and its users, who are well experienced with 

RC aircraft and Gasoline Engine. Large scaled RC aircrafts are very dangerous. Please 
operate if more than two people when you use my product on the RC Aircraft. Do not 
start the engine by oneself.

▪ My Products are “home-made,” and is for people who have well experience and knowl

-

edge of RC aircraft. I will offer repairing and parts supply as much as I can, but I can 
provide only supports as an individual, not like other large companies, so please be 
forewarned.

▪ You can be able to use my products if you are in agreement with the statements above.

WARNING

Summary of Contents for 2.2ci












Reviews: