Electrical Requirements
CAUTION
•
This unit is designed for countertop use only.
•
Never
block the air vent on the left side.
• This unit is designed to be in operation in an
area with a maximum ambient temperature
of 80°F, 26°C. Warmer ambient temperature
will result in reduced ice quality and product.
•
Never
operate this unit in direct sunlight.
• Allow for a minimum clearance of 12 inches
on the left side, ½ inch on the right, 2 inches
on the back, and ½ on the top of clearance
on the left side, to ensure proper function of
the unit.
DANGER
It is required that you connect this unit only
to a GFCI protected receptacle. It is strongly
recommended that you do not use an adapter
to connect this unit because of safety hazards.
Portable Nugget Ice Dispenser
Quickstart Guide —
Model: FDFM1JA01
INSTALLATION
REQUIREMENTS
Clearance Requirements
WATER
We recommend using
distilled, bottled OR
filtered water,
as this will improve the
performance of the machine. Tap water with a
hardness of <100 PPM is also acceptable. The
machine will
NOT
produce ice
and will
automatically go into clean mode
if tap water
with a hardness > 100 PPM is used
Water
Requirements
1
8
2
3
6
5
7
4
1.
Display Panel
2.
Ice Dispense Point
3.
Water Port for Funnel
4.
Reservoir Cover
5.
Air Vent
6.
Water Drip Tray
7.
Power Cord
8.
Drain Tube Plugs/Holder
www.kbgoodice.com
NOTE
Do NOT add water until Water Level red LED
flashes. Do NOT overfill the reservoir,
otherwise it may overflow when ice melts
completely.
