CONTROL PANEL LAYOUT
Switching the hob ON/OFF
Switching on and adjusting cooking zones
Deactivation of cooking zones
Child lock
5
4
To switch the hob ON, press the button and the cooking zone displays light up.
To switch off, press the same button until the displays switch off. All the cooking
zones are deactivated.
If the hob has been in use, the residual heat indicator “H” remains lit until the
cooking zones have cooled down.
If within 120 seconds of switching on, no heating zone is selected, the hob switches
off automatically.
This function locks the controls to prevent accidental switching on of the hob.
To activate the child lock function, switch on the hob and hold button for 3 seconds;
the timer shows Lo. Then the control panel is locked. To deactivate the control panel
lock, repeat the activation procedure. The Lock goes off and the hob is active again.
Once the hob is switched on and the pan is positioned on the chosen cooking zone,
select the zone using the corresponding button: the display shows level 0.
Each cooking zone has various power levels,
adjustable with the / / / / / / / / buttons,
going from “1”: min. level, to “9”: max. level.
Select the cooking zone you wish to switch off. Press the corresponding button.
Press the key “ ” to set the level to “0”. The cooking zone switches off and the residual
heat indicator “H” lights up.
1
0
2
3
4
5
6
7
8
9
0
1
0
2
3
4
5
6
7
8
9
Press and in the meantime, the lights will be on and the whole cooking zone
corresponding will be open, press or alone, the lights will be off and only one single
cooking zone corresponding selected, if you press again and in the meantime,
the lights will be off and the whole cooking zone corresponding will be deactivated.
Pause
Auto switch off
Pause-Button: When this button is pressed, the cooktop stops working. Press the
button again and the cooktop begins to work again.
The hob will automatically switch off when you do not set cooking time, forget to switch
off the hob, or do not operate the hob at all. The relationship between the power level
and default switch off time is shown in below figure.
Timer
The timer can be used to set cooking time for a maximum of 99 minutes
(1 hour and 39 minutes) for all cooking zones.
Select the cooking zone to be used with the timer, press the button with
the clock symbol then set the desired cooking time using the
/ / / / / / / / / buttons of the timer function
(see figure). After a few seconds, the timer begins the countdown.
Once the set time has elapsed, an acoustic signal sounds and the hob switches
off automatically.
To deactivate the timer, press the “ ” button to set the display showing “00”
or hold the button with the clock symbol for at least 4 seconds.
Power level
The hob automatically switches
off after
1-9
2 hours
CONTROL PANEL WARNINGS
Incorrect or missing pot indicator – Error code “E0”
If you are using a pot that is not suitable,
not correctly positioned or not of the correct dimensions for your induction hob,
the symbol” E0” mean “no pot” will appear in the display (see figure at side). If no pot is
detected within 180 seconds, the hob switches off.
Residual heat indicator
The hob is fitted with a residual heat indicator for each cooking zone.
These indicators alert the user when cooking zones are still hot.
If the display shows , the cooking zone is still hot. If the residual heat
indicator of a given cooking zone is lit, that zone can be used, for example,
to keep a dish warm or to melt butter. When the cooking zone cools down,
the display goes off.
If you press the button, the cooking zone selected will be in level 9, press again
the button, the cooking zone selected will be in booster,
and if you press it again the booster will be deactivated.
Flex
zone