18
i n f o @ k b g o o d i c e . c o m
1
8
with wiring problems.
f. Display PCB is defective or
with wiring problems.
f. Call service.
Water dispenser is
slow
a. The water dispensing tubes
are kinked.
b. The water dispensing valve is
defective.
a. Straighten them.
b. Call service.
Water is leaking
a. The dispenser drip tray is full.
b. The condensate drip tray is
full.
c. The internal water reservoir or
tubes are leaking.
d. The water level sensor of the
internal water reservoir is
defective.
e. The water dispensing valve is
defective.
f. Ice is being melted because of
high freezer temperature.
a. Empty it.
b. Empty it.
c. .Call for service.
d. Call for service.
e. Call for service.
f. Check for power or call for service.
Icemaker evaporator
is iced
a. The freezer door is not closed
properly.
b. The ice chute flap is not closed
properly.
c. Water fill tube is leaking water.
a. Close it.
b. Close it.
c. Align the fill tube in the fill cup.
Both freezer and
icemaker evaporators
are iced
a. The defrost solenoid valve is
defective or with wiring
problems.
b. The defrost drip tray heater is
broken or with wiring problems.
c. The evaporator fan is broken.
d. The defrost sensor is
defective.
e. The freezer sensor is
defective.
a. Call for service.
b. Call for service.
c. Call for service.
d. Call for service.
e. Call for service.
Codes
Codes
Faults
Response
E01
Defrost temperature probe
Call service
E02
Freezer temperature probe
Call service
E03
Hot water temperature probe
Turn off heater & Call service
E04
Hot water temperature extremely high
Turn off heater & Call service
E05
Water level float switch
Turn off heater & Call service
E06
Freezer door is open
Close door
E07
Ice maker
Call service
E08
Display board or control board
Call service
E09
Freezer temperature extremely high
Disconnect power & Call service
E10
Freezer temperature high
Disconnect power & Call service
