13
2 4 4 1 2 M a i n S t . S u i t e 1 0 5 , C a r s o n , C A 9 0 7 4 5
x
Drain water following instructions in Section 1.
x
Fill the water reservoir with clean potable water to MAX WATER FILL.
x
Plug the unit into power.
Add Water LED will flash quickly with 5 beeps if
the water reservoir is full.
x
P
ress and hold the Clean button for 3 seconds to start cleaning for rinse
process. The Cleaning LED will illuminate. Press and hold the Clean
button again for 3 seconds in 5 minutes to stop rinsing.
x
Drain water following instructions in Section 1.
x
Repeat the rinse process 2~3 times.
12-How to clean the air vent every 3 months to prevent condenser
from blocking
x
Unplug the unit.
x
Use a condenser brush or a vacuum cleaner with an extended
attachment to clean the air vent.
x
Plug the unit into power.
13-Cleaning the pump protector when it is dirty
x
Drain water following instructions
in Section 1.
x
Remove the water reservoir door
and lift up the pump protector.
x
Clean the pump protector with
dishwashing liquid and rinse it
with potable water.
x
Replace the pump protector and
press it down.
