8
8
i n f o @ k b g o o d i c e . c o m
1.
Filling the water reservoir for the first time use
x
Remove the reservoir door by simultaneously pulling both sides
outwards.
x
Add clean potable water to MAX WATER FILL.
x
Replace the magnetically attached door.
2. Flushing the unit for the first time use
x
Plug the unit into power. Add Water LED will flash quickly with 5 beeps if
the water reservoir is full.
x
Press and hold the Clean button for 3 seconds to start cleaning for
flushing process, the Cleaning LED illuminates (it takes 30 minutes to
complete and the Cleaning LED goes off).
x
U
nplug the unit
when the flushing process is complete
.
x
Unhook the plug/holder with drain tubes out of the unit back and l
ower
them to a bucket or sink.
x
Press and hold the release buttons on the connectors to disconnect the
plug/holder and release water.
x
Reconnect and hook them back to the unit.
2.
Making ice for the first time use
