A s s e m b l y I n s t r u c t i o n s
|
KBL 4800
α
/ 5600
α
10
3.
Remove the front part forward. Do this with the help
of a second person.
• Be careful! Do not damage the cable
connections.
• Place the front part at a save place.
Inside downwards!
5.
Removing the bed part. Do this with the help
of a second person.
6.
Lower the canopy pane.
7.
Turn the two canopy security screws M8 x 40
counter-clockwise 3-4 turns.
Remove the two lateral seals al the left and right hand
side. Remove the lower half of the chrome crescent at
the foot area.
Position of the secu-
rity screw beneath the
facing.
4.
Removing the bed part.
Remove the bed pane and open the bed.
Dismantle the two damper (LHS & RHS). Close the
bed and unscrew the 4 phillips screws M6 x 20
at the two bed hinge-joints.
RHS
RHS
6
