9
Operation and Service megaSun 4500
The power of the body fan can be increased or reduced step-
wise (by 10 % each) by touching the „+“ or „–“
fi
elds. The initial
value after turning on the unit is set to 30%.When changing the
value, the current setting is displayed as a two-digit number bet-
ween „20“ (minimum) and „99“ (maximum) in the numerical
fi
eld
for a short time.In order to switch off the body fan completely,
press the „–“
fi
eld several times until the value of 20% appears.
After that press the „–“ key once again and keep it pressed for
0.5 sec. After a time lag the body fan is eventually switched off.
The body fan can be switched on again at any time simply by
touching the „+“
fi
eld.
Level II
Once the tanning program has been started, the
tannersare automatically switched on at maximum setting.
Level I
To reduce the output to level I, use the „–“
fi
eld.
This step is not available with megaSun 4000 Super, Super Po-
wer and Ultra Power UV type 3.
Level 0
To switch off the facial tanners completely, touch
the „–“
fi
eld again for at least 3 seconds. Touching the „+“ key,
you can switch the facial tanners on again, or increase their po-
wer.After having switched the facial tanners off, there is a time
lag (depends of its temperature) before they may be turned on
again.
„Spahetti“ tubes in XXL tanning beds:Touching the „-“ key, you
can switch off every second “Spaghetti” tubes in the facial area.
(Switch on by touching „+“ key)Touching the „-“ key again, you
can switch off the rest of the “Spaghetti” tubes in the tanning
bed. (Switch on by touching „+“ key).
Body fan
Facial tanner