WELLNESSCOLOR G
This option refers to the illumination with 24 green
LEDs; however, these cannot be switched on or off
(no menu function). The colour function “activeColor”
(R - G - B) indicated in the menu is not functional
and not available for megaSun 5600/5800 models. It
remains in the menu for compatibility reasons only.
ACTIVECOLOR IS ONLY AVAILABLE FOR MEGASUN
BEAUTY.
AROMA
The “aroma” function
can be activated with
the “+” buttons and deactivated by pressing the “–”
buttons. The display fl ashes when the function is
deactivated. KBL offers 2 fragrances: “Sunrise” and
“Daydream”. There is always only one fragrance at a
time available in the solarium; however, it can easily be
exchanged. The fragrance comes in the form of a gel.
Please note that the gel will not be fully used up; a
small amount will always remain. The fi lling status is
displayed so that the operator knows when to replace
the gel. The scent itself is released at the foot of the
unit. Aroma and aquaCool are activated immediately
one after the other (Aroma – aquaCool – Aroma) and
repeat at one-minute intervals.
Note:
pureAir and Aroma are mutually exclusive. As
long as the Aroma function is active, pureAir remains
deactivated.
MEGAVOICE
The “Voice” function can be
activated by pressing the
“+” buttons (2...5), and deactivated with the “
–”
buttons (6...0). The display fl ashes as long as the
function is switched off. megaVoice guides the studio
customer quickly and easily through the operation
options of the tanning system. If desired, the customer
can deactivate megaVoice during the tanning
session.
PUREAIR
The “pureAir” function cannot be switched on or off
using buttons. Note: pureAir and Aroma are mutually
exclusive. As long as the Aroma function is active,
pureAir remains deactivated.
Functions (KBL/5)
This menu includes the following functions:
Session time
•
Channel selection
•
Volume of the music
•
Air-conditioning unit
•
Sunlamps
•
Body fan
•
Press the START button to turn on
the unit during the warm-up time. If
the session has been interrupted by pressing the
STOP button, it can be continued by pressing START,
provided that the session time made available by the
coin box/timer system has not elapsed yet. The
numeric display indicates the session time and, after
the total session time has elapsed, the running text.
The tanning session can be terminated
prematurely by pressing this button
for at least two seconds.
NUMERIC DISPLAY
While the tanning program is running,
the current session time is displayed
here. If the volume is changed, the
set value between 0 ... 99% is briefl y
displayed here. If the fan power is changed, the
setting is also briefl y displayed as a value between
20 % and 99 %.
TERMINATION OF THE TANNING SESSION
After the session time has elapsed, a program to shut
down the tanning system starts:
Tanning lamps, tubes and the ventilation are shut
down in steps and switched off.
O p e r a t i n g I n s t r u c t i o n s
|
megaSun 5600
21
