time using the plus and minus buttons 2, 3, 7, 8.
Press START. Proceed in the same way for
AOF
,
BON
and
BOF
.
Press STOP to leave the menu.
4.
Setting date and time
④
The current time and date are set within the menu
item
TIME/DATE
. This information is required for
the proper execution of the timer function for the
decorative lighting. Date and time are displayed for
approx. 2 seconds after the unit has been turned on.
Invoke the
1.
TIME/DATE
menu.
Choose the time setting with START and set the
2.
time by pressing the plus or minus buttons to the
corresponding number.
Choose the date setting using 5 (plus button) or
3.
0 (minus button) and set the date by pressing
the plus or minus buttons to the corresponding
number. The day of the week is determined
automatically.
Save the settings using START and press STOP
4.
to exit the menu.
Entering PIN II
④⑤
By entering your PIN II here, you will be admitted to the
next service level. (See
Settings on service level II).
Setting aquaCool
characteristics
④
SETTING THE AQUACOOL CYCLE TIME
The menu item
AAC/Cycle
is used to set the
interval between spraying cycles: between 0.5 and
5 minutes.
Invoke the
1.
AAC
menu.
Press START to invoke the submenu and 5 (plus
2.
button) or 0 (minus button) to select
Cycle
.
Set the cycle time using 4 (plus button) or 9 (minus
3.
button) .
Press the START button to save the settings and
4.
leave the menu by pressing STOP.
PRESETTING TANNING MODE
Use the menu item
AAC/AQUA/AQUA
to determine
whether aquaCool is started automatically with the
tanning session (
AQUA ON
) or if it can be activated
manually by the studio client (
AQUA OFF
).
Invoke the
1.
AAC
menu.
Invoke the submenu by pressing START twice;
2.
then press 5 (plus button) or 0 (minus button) to
select
AQUA
.
Select
3.
AQUA ON
by pressing 4 (plus button) or
AQUA OFF
by pressing 9 (minus button).
Save the settings by pressing START and exit the
4.
menu by pressing the STOP button.
INITIALISING AQUACOOL
The menu item
AAC/AQUA/INIT
is used to start a
spraying cycle of 90 seconds. This is required before
the start-up or after a repair in order to exhaust the
system.
Invoke the
1.
AAC
menu.
Press START twice to open the submenu and
2.
select
INIT
by pressing 5 (plus button) or 0
(minus button).
Start the spraying cycle by pressing 1 (plus
3.
button).
Press STOP to exit the menu.
4.
SETTING THE AQUACOOL SPRAYING TIME
The menu item
AAC/AQUA/AQ.Time
is used to set
the duration of a spraying cycle: between 2 and 6
seconds.
Invoke the
1.
AAC
menu.
Press the START button twice to invoke the
2.
submenu, then select
AQ.Time
by pressing 5
(plus button) or 0 (minus button).
Select the spraying time by pressing 4 (plus
3.
button) or 9 (minus button).
Save the settings with START and press STOP to
4.
leave the menu.
O p e r a t i n g I n s t r u c t i o n s
|
megaSun 5600
31
