Filter panes
SAFETY FUNCTIONS
The facial tanners are equipped with an additional
safety feature. There is a protective pane-switch
behind each of the fi lter panes; this switch will turn
off the tanning lamp if the fi lter pane is missing or
damaged.
Note:
Never operate the tanning system with
a defective fi lter pane. Carry out regular visual
inspections! Only replace fi lter panes with ones of the
same type. The fi lter panes must only be dismantled
and installed by trained and qualifi ed staff.
FILTER PANES IN THE CANOPY SECTION AND
THE SIDE SECTION
After having dismantled the fi lter pane (see below),
clean the fi lter pane with a commercially available
cleaning agent and a soft cloth or chamois.
Procedure
Fig.
1
Dismantle the acrylic pane of
the canopy, or of the side part
respectively.
2
Undo the screw fi
xing the fi lter-pane
cover (1), pull it towards the front (2)
and remove it (3).
41.1
3
Use both hands to press the fi lter pane
downwards carefully (4) until the pane is
released from the upper retention clips
(5). Then remove the pane in an upward
movement towards the front (6).
41.2
4
After cleaning the assembly is carried
out in reverse order.
Figure 41.1: Removing the fi lter-pane cover
Figure 41.2: Taking the pane off the retention clips
MARKING OF THE FILTERS
The fi lters are marked “EVO 19100” on their edges.
O p e r a t i n g I n s t r u c t i o n s
|
megaSun 5600
41
