Component
Application
Description of the cleaning procedure
Interval
①
Bench pane &
handle positions
Directly on the
surface
• Use a suitable cleaning and disinfecting agent (e.g.
megaClean plus) and dilute it according to the man-
ufacturer’s instructions.
• Use a soft, only slightly damp lint-free cloth!
• For thorough cleaning and disinfection, the prod-
uct must remain in contact with the surface to be
cleaned and disinfected for a certain time. This
specified time depends on the cleaning and dis
-
infecting agent used. Follow the manufacturer’s
instructions.
• Then remove the remaining cleaning agent and
disinfectant.
After each tanning session
②
Control panels &
touchscreens
③
Canopy and lateral
pane
Directly on the
surface
④
Smartphone
storage space
⑤
Protective goggles &
neck cushion
⑥
Filter cartridges
-
Remove and rinse under flowing water.
100 operating hours
⑦
Condensate tank
-
Empty when a message is displayed on the internal
control panel.
-
Fluorescent tubes
Remove the tubes and clean them with warm water
and a leather cloth.
200 operating hours
UV filters of the facial
/ shoulder tanners and
beautyBooster
Clean with a slightly damp leather cloth.
Chrome-plated compo-
nents
-
Use a damp leather cloth and an acrylic glass cleaner
(antistatic).
If required
Lacquer and plastic
surfaces
-
Use a cloth dampened with light soapy water. Never
clean dry!
If required
CLEANING & DISINFECTION SCHEDULE
⑥
①
②
③
⑤
⑥
④
⑦
Operating instructions
| 1/2
| megaSun K5/K6/K7 PRODUCT SERIES
36
Summary of Contents for MegaSun K7S
