M a n u a l e o p e r a t i v o
|
megaSun Shuttle 360°
17
Adjusting the upper-body
tanner
Level I / Level II
After starting the tanning session, the upper-body
tanner starts working on level I. After one minute, its
power is automatically raised to level II. Only after this
minute has elapsed can the power setting be changed.
•
To
reduce
the power, press the
minus button.
•
To
increase
the power, press the
plus button.
Adjusting the body fan
20-99%, off
While the value is being set, it is
displayed to the right of the STOP button.
The initial value is de
fi
ned via AIR/
A.START in the service menu.
•
To
reduce
the fan power, press the
minus button.
•
To
increase
the fan power, press the
plus button.
•
To
turn off
the fan, reduce the power to 20%, then
press the
minus button again and keep it pressed
for 0.5 seconds. The fan is turned off after a delay.
Selecting the audio source and
track (optional feature)
This section is only applicable to units with an audio
option.
SELECTING AN AUDIO SOURCE
The audio source (Wellness, Pop or Studio Music) is
selected via “P” (= program) in display 2. However, a
selection is possible only on the condition that at least
two sources are available and have been con
fi
gured in
the service menu.
After the start of the tanning program, the audio
source de
fi
ned as the default one in the service menu
is selected. If Wellness or Pop has been selected as
the default audio source, one title is randomly chosen
from the directory and played after the unit has been
turned on. After that, the following tracks are played
one after the other.
Indicates that a selection of
various audio sources is available.
When you have made your
choice, the selected source is
displayed for a short moment.
WELLNESS
Indicates that you have selected
the Wellness tracks.
POP
Indicates that you have
selected the Pop tracks.
STUDIO
Indicates that you have
selected studio music.
The audio sources to be available are de
fi
ned
via AUDIO/WPS in the service menu.
The default source is determined via
AUDIO/PRESEL in the service menu.
In order to choose an audio source, proceed as
follows:
•
Press
to invoke display 2.
•
Press the
plus or minus button above or below
just as often as necessary to have the desired audio
source displayed.
SELECTING THE AUDIO TRACK AND CHANNEL
When you switch over from Wellness or Pop to
Studio Music, the player remembers the title being
played at that time and re-starts playing it after
switching back.
This symbol means “next track” in
Wellness or Pop mode and “next
channel” with the studio music option.
In order to choose a track or a channel, proceed as
follows:
•
Press the
plus button above the symbol to jump to
the following title/channel.
•
Press the
minus button below the symbol to jump to
the previous title/channel.
