M a n u a l e o p e r a t i v o
|
megaSun Shuttle 360°
23
Displaying the operating hours
of the solarium/of the tubes
Both the operating (working) hours of the solarium
(
WORK
) and the operating hours of the tubes (
TUBE
)
are displayed under the menu item
Operation-
Info
.
1. Invoke the
Operation-Info
menu.
2. Use START to select the submenu.
3. Press 0 (
minus button) or 5 (plus button) to invoke
the displays
WORK
and
TUBE
.
Resetting the operating hours
of the tubes
Each time you replace the tubes you have to reset the
operating hours of the tubes to zero.
1. Invoke the
Operation-Info
menu.
2. Use START to select the submenu.
3. Press 0 (
minus button) or 5 (plus button) to invoke
RESET h TUBE
.
4. Press 1 (
minus button) until the display is set to
zero.
Presetting the back tanner
In the menu item
BACKTAN
you determine whether the
back tanner is switched on (
PRESEL ON
) or off
(
PRESEL OFF
) at the beginning of the tanning session.
1. Invoke the
BACKTAN
menu.
2. Use START to select the submenu.
3. Press 4 (
plus button) to set
PRESEL ON
or 9
(
minus button) to set
PRESEL OFF
.
4. Save the settings by pressing START, press STOP
to exit the menu.
Setting audio characteristics
BASIC SETTINGS AUDIO SYSTEM
The menu item
PIN II/CM
is used to make basic
settings for the audio system.
C is deactivated if only external channel selection
with exactly one channel is available for the unit. The
channel-selection symbol is not displayed. M is
deactivated in case there is no audio system available.
No symbols regarding the audio system are displayed.
1. Invoke the
PIN II
menu and enter PIN.
2. Set the desired value by using the
plus and minus
buttons at the corresponding letter.
3. Save the settings by pressing START, press STOP
to leave the menu.
ACTIVATING/DEACTIVATING AUDIO SOURCES
The menu item
AUDIO/WPS
is used to determine
which audio sources are to be made available to the
studio guest. W=Wellness, P=Pop, S=Studio. In the
case of a top mark (apostrophe, ), the corresponding
source is activated while it is deactivated if a bottom
mark is shown (comma, ). All activated sources are
listed under AUDIO/PRESEL.
1. Invoke the
AUDIO
menu.
2. Use START to invoke the submenu and 5 (
plus
button) or 0 (
minus button) to select
PRESEL
. Set
the desired value by using the
plus and minus
buttons at the corresponding letter.
3. Press START to save the settings and leave the
menu by pressing STOP.
PRESELECTING AUDIO SOURCES
To determine which audio source is selected as the
default source when the tanning session is started,
the menu item
AUDIO/PRESEL
is used. Only
sources that are activated under
WPS
can be
selected.
1. Invoke the
AUDIO
menu.
2. Press START to invoke the submenu and press 5
(
plus button) or 0 (minus button) to select
WPS
.
3. Preselect the desired source by pressing 4 (
plus
button) or 9 (
minus button).
4. Press START to save the settings and STOP to
exit the menu.