M a n u a l e o p e r a t i v o
|
megaSun Shuttle 360°
24
MUSIC IN STANDBY MODE
The menu item
AUDIO/NONSTOP
is used to
determine whether music in standby mode is on (ON)
or off (OFF).
1. Invoke the
AUDIO
menu.
2. Use START to invoke the submenu and 5 (
plus
button) or 0 (
minus button) to select
NONSTOP
.
3. Set
NONSTOP ON
by pressing 4 (
plus button) or
NONSTOP OFF
by pressing 0 (
minus button).
4. Press START to save the settings, and leave the
menu by pressing the STOP button.
VOLUME IN TANNING MODE
The menu item
AUDIO/VOL.HOT
is used in order to
determine the volume of the music during a tanning
session. The maximum possible volume of the unit is
at 100%.
1. Invoke the
AUDIO
menu.
2. Use START to invoke the submenu and press 5 (
plus
button) or 0 (
minus button) to select
VOL.HOT
.
3. Set the desired percentage by pressing 4 (
plus
button) or 9 (
minus button).
4. Press START to save the settings and STOP to
leave the menu.
VOLUME IN STANDBY MODE
To set the volume at which music is played when
there is no tanning session in progress, choose the
menu item
AUDIO/VOL.COOL
. The maximum
possible volume of the unit is at 100%.
1. Invoke the
AUDIO
menu.
2. Press START to invoke the submenu and 5 (
plus
button) or 0 (
minus button) to select
VOL.COOL
.
3. Set the desired percentage by pressing 4 (
plus
button) or 9 (
minus button).
4. Save the settings by pressing START and leave
the menu by pressing the STOP button.
EXTERNAL CHANNEL-SELECTION PROCEDURE
The external channel-selection procedure is de
fi
ned
via the menu item
AUDIO/CH
.
1. Invoke the
AUDIO
menu.
2. Invoke the submenu by pressing START and select
CH
by pressing 5 (
plus button) or 0 (minus button).
3. Select
PULS
by pressing 4 (
plus button) or
BCD
by pressing 9 (
minus button).
4. Press the START button to save the settings and
leave the menu by pressing STOP.
Setting aquaCool properties
PRESETTING TANNING MODE
Use the menu item
AAC/AQUA/AQUA
to determine
whether aquaCool is started automatically with the
tanning session (
AQUA ON
) or if it is activated by the
studio guest (
AQUA OFF
).
1. Invoke the
AAC
menu.
2. Invoke the submenu by pressing START twice;
then press 5 (
plus button) or 0 (minus button) to
select
AQUA
.
3. Select
AQUA ON
by pressing 4 (
plus button) or
AQUA OFF
by pressing 9 (
minus button).
4. Save the settings by pressing START and exit the
menu by pressing the STOP button.
SETTING THE AQUACOOL CYCLE TIME
The menu item
AAC/AQUA/Cycle
is used to set
the interval between spraying cycles: between 0.5
and 5 minutes.
1. Invoke the
AAC
menu.
2. Press START to invoke the submenu and 5 (
plus
button) or 0 (
minus button) to select
Cycle
.
3. Set the cycle time by pressing 4 (
plus button) or 9
(
minus button).
4. Press the START button to save the settings and
leave the menu by pressing STOP.
SETTING THE AQUACOOL SPRAYING TIME
The menu item
AAC/AQUA/AQ.Time
is used to set
the duration of a spraying cycle: between 2 and 6
seconds.
1. Invoke the
AAC
menu.
2. Press the START button twice to invoke the
submenu, then select
AQ.Time
by pressing 5
(
plus button) or 0 (minus button).
3. Select the spraying time by pressing 4 (
plus
button) or 9 (
minus button).
4. Save the settings with START and press STOP to
leave the menu.
