M a n u a l e o p e r a t i v o
|
megaSun Shuttle 360°
36
System messages
Problem
Possible cause
Remedy
Tanning system
does not operate
No voltage supply
Check whether the power supply is switched on.
No enabling signal from
the coin-box system
Check the coin-box system (simulate the enabling).
No control voltage
Check the fuses.
One or more lamps
do not work
Lamp not correctly
positioned in its socket
Turn the lamp in the socket.
Lamp defective
Replace the tanning lamp.
Ballast or igniter defective
Check the devices and replace, if necessary.
Voltage supply partly interrupted
Check the mains supply.
Unit overheats
Fan is not running
Check the fan.
Insuf
fi
cient aeration and
ventilation of the booth (in
fl
ow
temperature too high)
Measure the ambient temperature.
Error message
Possible cause
Remedy
Th.Ablüfter
Bi-metal switch triggers
Check the air-intake/air-discharge system. Let
the tanning system cool down and acknowledge
the message by pressing the STOP button. If
the fault persists, contact Customer Service.
Bus Error
I
2
C bus faulty
Check the patch cable and the correct position of the
SD card. If the fault persists, contact Customer Service.
