M a n u a l e o p e r a t i v o
|
megaSun Shuttle 360°
9
Connections
Connecting the mains voltage
Both the power supply and the related connection
work must comply with national standards (e.g. VDE
in Germany). The connection may only be performed
by quali
fi
ed expert staff.
DANGER
Live components
Risk of fatal injury due to electric shock
when touching live parts.
• Switch off mains voltage.
• Protect against re-connection.
Both the power supply and the related connection
work must comply with national standards, e.g. those
set up by VDE in Germany. The connection work
must only be performed by quali
fi
ed expert staff.
The connection to the 400 V mains must be protected
by fuses. Their speci
fi
cations are listed in the chapter
“Technical data”.
A residual current-operated circuit breaker (RCD) is
absolutely required. KBL-Solarien AG recommends
the following type: KBL 3200 0770 00 (type ABB F
374 63/0.03A)
Should the operation of the tanning unit cause any
interference in the power supply network, e.g. with
ripple-control systems (TRA), consult your power
supply company to have corresponding blocking
elements (audio frequency suppressors) installed.
400V / 3N / 50Hz terminal box with fuses
(see Technical Data) and discriminating
residual current-operated circuit breaker
of type ABB F 374 63/0,03A (KBL
3200077000)
green/yellow
black or 1
brown or 2
grey or 3
blue or 4
PE L1 L2 L3 N
Connection to the mains supply
Mains connection
Connecting an external audio
source
Connection of external audio
source on the Shuttle 360°
R-
green
Wiring on the equipment's side
yellow
white
brown
R+ L- L+
The potentiometer (1) required for level adjustment
is located on the audio CPU (audio switch) in the
base of the Shuttle.
