08/2017
CHECKLIST - MAINTENANCE STATUS
Model: Serial number: Construction year:
Elements of effective maintenance
C h e c k e d / F i x e d
2.4
Verify that the manual detailing operating and maintenance
instructions is still available and up to date
yes
no
2.5
Establish an accurate record-keeping system for the main-
tenance reports
yes
no
2.6
Danger of overheating by obstruction of the airflow
yes
no
2.7
Cleaning of the tanning device
yes
no
2.8
Approved UV Tubes installed
yes
no
2.9
Installation record form filled out
yes
no
General electrical faults
3.1
Cables and connections fault-free
yes
no
3.2
Approved starters installed
yes
no
3.3
Approved ballasts installed
yes
no
3.4
Approved capacitors installed. Capacitors installed correctly
and the connecting cables properly fixed in the clamps
yes
no
Important positions
4.1
Check all connections externally for signs indicating elec-
trical overstress
yes
no
4.2
Check the connector and socket interior for signs of elec-
trical overstress
yes
no
4.3
Very important assembly information - WAGO / Adels connectors
yes
no
4.4
Cable tie applied too close -> bad contact
yes
no
4.5
Bad or no contact
yes
no
4.6
Missing cable ties
yes
no
4.7
Missing cable ties and messy cable routing
yes
no
4.8
After completion of the work check the position of the plugs
on the back of the tanning device
yes
no
4.9
Installation record form filled out
yes
no
Date checked:
Checked by:
To finish the process, please send the completed checklist to e-mail: customerservice@kbl.de
