background image

Display Features

The display pad is equipped with 3 buttons including “       ”, “       ” and “      ”. The “      ” button is the on/off button.
Press and hold the “      ” button on the handlebar controls to turn on the display. Now, your e-bike is ready to ride. To turn it off, press and hold 
the “      ” button for 3 seconds. Press the UP button for 3 seconds to turn on the light.
The display pad provides you with a variety of displays to meet the demand of your riding. The display contents are:

1. Status Indicator

ᶺ„‘”ƒŽ‘–‘”
ᶺ”ƒ‡†‹…ƒ–‘”
ᶺ‡ƒ†Ž‹‰Š–

2. Unit of Measure
    You can toggle between miles or kilometers based on your location and preference.

3. Odometer/Trip Odometer: 
     It shows total riding range and single riding range.

4. Speed Indicator
    It shows the real-time speed of your e-bike.

5. Battery Level Indicator
    The battery level indicator on the display will show the current battery energy remaining. 

6. Pedal Assist Level  
    It shows the pedal assist level and the default range is 0-3 levels. Press the UP or DOWN button to adjust the pas level when the power on.

12

+

-

Summary of Contents for FLIP



























Reviews: