28592_EDEK
ZA0044-0224-1_EN
29
4.3.11 Wizard setting Security Mode
Security Mode:
Active: high security mode
The device is set up in security mode.
Communication is encrypted and device
access is protected. The completion of the
commissioning in security mode requires the
setup of the necessary user accounts and must
be completed with the software WinPQ or
WinPQ lite with version 5.0 or higher. All
details on encryption technology etc. are
described in the security documentation.
Inactive compatible mode
The installation of devices in compatibility
mode results in a non IT-secure operation of
the measuring device, if no other measures
for the encryption of the connection are
available in the used network (e.g. VPN solu-
tions with encryption / disconnected network
or similar), because neither the communi-
cation between WinPQ software and the PQ
device is encrypted nor the device access is
protected. This mode is intended for compati-
bility with WinPQ systems smaller than version
5 and systems with WinPQ versions 5 or higher
should be operated in high security mode..
In any case, make a note of the
serial number of your measuring
instrument!
When the SD card is inserted,
an identification file with the
required certificates for the reco-
gnition of the device is stored in
the root directory of the SD card
when the device is restarted.
Parameterization
Setup wizard
Security mode
active
WinPQ Version >5.0 benötigt!
