KBS Gastrotechnik 120824, Quick Manual

rev. 1 - 04/2019

29

MANUTENZIONE - MAINTENANCE - ENTRETIEN - WARTUNG

timento abusivo o non corretto del prodotto comporta l’applica-
zione delle sanzioni previste dalla corrente normativa di legge.

Informazioni sullo smaltimento in Italia

In Italia le apparecchiature RAEE devono essere consegnate ai Centri di 
Raccolta (chiamati anche isole ecologiche o piattaforme ecologiche) 
o al rivenditore presso il quale si acquista una nuova apparecchiatura, 
che è tenuto a ritirarle gratuitamente (ritiro “uno contro uno”);

Informazioni sullo smaltimento in nazioni dell’unione europea

La Direttiva comunitaria sulle apparecchiature RAEE è stata rece-
pita in modo diverso da ciascuna nazione, pertanto se si deside-
ra smaltire questa apparecchiatura suggeriamo di contattare le 
autorità locali o il Rivenditore per chiedere il metodo corretto di 
smaltimento.

EN

 ORDINARY CLEANING 

BEFORE PERFORMING ANY MAINTENANCE, CUT OFF 
THE POWER SUPPLY TO THE MACHINE AND WEAR 
SUITABLE PERSONAL PROTECTION EQUIPMENT (E.G. 

GLOVES, ETC.).

USERS MUST CARRY OUT ONLY ROUTINE MAINTE-
NANCE OPERATIONS (I.E. CLEANING). FOR EXTRAOR-
DINARY MAINTENANCE, CONTACT A SERVICE CEN-

TRE AND ASK FOR THE ASSISTANCE OF AN AUTHORISED 
TECHNICIAN.

THE WARRANTY IS NULL AND VOID IN THE EVENT OF 
DAMAGES DUE TO NEGLIGENT OR INCORRECT 
MAINTENANCE (E.G. USE OF UNSUITABLE DETER-

GENTS). 

BEWARE OF HOT BODIES WHEN PERFORMING MAIN-
TENANCE AND CLEANING ON THE ENGINE

BEWARE OF SHARP EDGES ON SLOTTED CONVEY-
ORS, ON THE CONDENSER COIL (THE FINS ARE PRO-
TECTED BY A FILTER), ON THE MOTOR SUPPORT BASE 

(HOLES) AND ON THE SLOTS IN THE DASHBOARD.

To clean any component or accessory, DO NOT use:

 - abrasive or powder detergents;
 - 

aggressive or corrosive detergents (e.g. hydrochloric or 
sulphuric acid, caustic soda, etc,). Warning! Do not even use 
these substances to clean the floor under the equipment;

 - abrasive or sharp tools (e.g. abrasive sponges, scrapers, steel 

brushes, etc.);

 - steamed or pressurised water jets.

TO ENSURE THAT THE DEVICE IS IN PERFECT USE 

AND SAFETY CONDITIONS, WE RECOMMEND YOU 
HAVE IT MAINTAINED AND SERVICED BY AN AU-

THORISED SERVICE CENTRE AT LEAST ONCE A YEAR.

DISPOSAL AT END WORKING LIFE

As per Legislative Decree no. 49 art. 13 dated 2014 
"Implementation of WEEE Directive 2012/19/EU on electric and 
electronic waste" 

The barred bin markings specify that the product was 
issued on the market after August 13, 2015 and should 
not be assimilated with other waste that at the end of its 
working life but disposed of separately. 

All equipment is made of recyclable metallic materials (stainless 

steel, iron, aluminium, galvanised sheet metal, copper, etc-) in 
percentages over 90% in weight. 
Put the equipment out of order for disposal removing the power 
cord and any compartment or chamber lock devices (where 
applicable).
Pay attention to managing this product at the end of its working 
life, reducing negative impacts on the environment and 
improving resource use efficiency, applying the "who pollutes 
pays", prevention, reuse, recycling and recovery preparation 
principles. 
Please remember that illicit or incorrect product disposal is 
punishable by law.

Information on disposal in Italy

WEEE equipment in Italy must be delivered to:
- Collection centres (also called ecological islands or platforms) 
- the dealer where new equipment is purchased who must 
withdraw it free of charge ("one to one" withdrawal);

Information on disposal in European Union countries

The Community Directive on WEEE equipment was assimilated 
in different ways in each country. Therefore we suggest you 
contact your local authorities or Dealer to request the correct 
disposal method.