10
ELECTRICAL APPLIANCES
Switch on the appliance as directed in the
instructions and reminders for use given in
Chapter " INSTRUCTIONS FOR USE " and
check:
•
the current values of each phase.
•
the correct operation of the heating ele-
ments.
15 TROUBLESHOOTING
ELECTRIC GRIDDLE PLATE
The appliance does not heat.
Possible causes:
•
Temperature thermostat defective.
•
Heating elements defective.
•
Safety thermostat tripped.
Heating cannot be adjusted.
Possible causes:
•
Temperature thermostat defective.
16
REPLACING COMPONENTS
REMINDERS FOR REPLACING COMPO-
NENTS.
•
Disconnect the appliance electrical power
supply, if present, before proceeding with
any operation.
•
After replacing a gas system component,
check for gas leaks at connection points.
•
After replacing an electrical system com-
ponent, check it is correctly wired.
ELECTRIC GRIDDLE PLATE
Replacing the heating element and the
indicator light.
•
Remove and replace the component.
•
Re-assemble all parts. For assembly, pro-
ceed in reverse order.
Replacing the working thermostat and
safety thermostat.
•
Remove the bulb from its seat on the bot-
tom of the hotplate.
•
Remove and replace the component.
•
Insert the bulb properly in its seat on the
bottom of the hotplate.
•
Re-assemble all parts. For assembly, pro-
ceed in reverse order.
17
CLEANING THE INTERIOR
•
Check the condition of the inside of the ap-
pliance.
•
Remove any built-up dirt.
•
Check and clean the fumes exhaust sy-
stem.
18
MAIN COMPONENTS
ELECTRIC GRIDDLE PLATE
•
Working thermostat
•
Safety thermostat
•
Heating element
•
Indicator light.
