30
GB-Gas Euro Range
Oriental- Gas-20190620
FR
M
-P
DE
-0
3-
04
(N
YT
/R
&
D/
20
18
10
08
)
1
2
3
4
5
Only professional and qualified mechanic can do this job.
1. By looking “Adjustment”, replace Main Burner Nozzles, Pilot Burner Nozzles, and adjust correctly Primary Air
Setting for each Main Burner.
2. Spare nozzles are available with the appliance.
3. Make sure the diameter printed on each nozzle in 1/100 of a millimeter.
4. Convert the appliance after turn the gas OFF and in UP position and let Gas Euro Range cool.
5.1 Gas Conversion
5.1.1 Main Burner Nozzle
1. Lift the Burner (1) about 10 mm and pull from mixing chamber (3)
2. Remove the fixing screw (2). This screw can be reach from below.
3. Remove the complete mixing chamber (3) by turn anticlockwise from the Nozzle.
4. Turn the pressure ring (4) from Nozzle. DO NOT lose the pressure ring.
5. Remove the screw (5) and take the complete Nozzle unit.
6. Remove the Nozzle from the Nozzle carrier and replace with the new one that suit to the table depend
to the country and gas type.
7. Fix the Nozzle with a non-hardening sealing tape.
8. Replace the burner by following instructions to opposite direction. Notice the Primary Air Adjustment.
Important!
On completion of the operation, make sure that there are no gas leaks or malfunctions
5. Gas Conversion
Fig. 12
G
as
C
on
ve
rs
io
n
