9
CLEANING AND CARE
REGULARLY CLEAN THE APPLIANCE.
Remember that before cleaning the back part of the appliance body you must
disconnect the appliance from the electrical energy supply socket by pulling
the plug out of the electricity outlet.
•
Clean the appliance inner surfaces with warm soapy water. Dishwashing detergent may also be
used. Wipe dry inner and outer surfaces.
•
Regularly clean the hermetic gaskets of the doors. Wipe dry.
e
REGULARLY CLEAN THE THAW WATER CHANNEL SPACE WITH A SPECIAL
CLEANER FOR THAT PURPOSE.
•
At least once a year clean dust away from the
back part of the appliance body and the
compressor. A soft brush, electrostatic cloth or
vacuum cleaner may be used for cleaning.
f
•
DO NOT use detergents containing abrasive
particles, acid, alcohol or benzene for cleaning the
appliance inner and outer surfaces.
•
DO NOT use for cleaning cloths or sponges that have coarse surfaces
intended for scrubbing.
PRACTICAL TIPS AND OBSERVATIONS
•
Do not keep bananas in the refrigerator – these fruits are sensitive to cold.
•
Do not keep prepared food and ready-to-cook (“heat and eat”) food in the same container.
•
Store in an airtight container in the appliance any foodstuffs that have a strong odour (e.g. fresh
fish, pâté de foie gras goose liver pâté, and cheese).
•
IF THE APPLIANCE IS TO BE LEFT SWITCHED OFF FOR AN EXTENDED PERIOD, LEAVE ITS
DOORS OPEN.
R e m a r ks o n t h e a p pl i an c e o p e r a t in g n o i s e.
As the appliance operates
and goes through the freezing cycle, various noises will be emitted. This is normal and is
not a sign of any malfunction.
•
As the refrigerant circulates around the refrigeration system, it causes sounds like murmuring,
bubbling, or rustling.
•
Louder sounds like popping or clicking may be heard for a short time as the refrigerator’s
compressor switches on.
CHANGING THE INTERIOR LIGHT BULB
When changing the interior light bulb, do the actions below in the order they are listed:
Model C 290 - see page 2, fig. 5
1.
Unplug the appliance from the mains by pulling the plug out of the electricity supply socket.
2.
Press the fixed of dome light to the right and pulling it down take off dome light.
3.
Replace the illuminating lamp. A lamp - 15W, a lamp holder - E14.
4.
At first put in dome light to the right, then press it up till its fixing.
5.
Connect the refrigerator to the mains.
Model C 140 – see page 2, fig. 6
1.
Unplug the appliance from the mains by pulling the plug out of the electricity supply socket.
2.
Push the interior light bulb lid retainer
A
to the right with a flat screwdriver and with your other
hand pull it down.
Summary of Contents for C 140
