11
•
The noise has become louder.
Check that the appliance is standing stable, on a level place.
To make it level, regulate the front feet. Check if the appliance is not touching any furniture, and
that no part of the refrigeration system at the back part of the appliance body is touching the
wall. Pull the appliance away from any furniture or walls. Check that the cause of increased
noise isn’t due to bottles, cans or dishes in the appliance that might be touching each other.
•
Water has appeared at the bottom of the refrigerator compartment.
Check whether a
thaw water channel space isn’t blocked. Clean the thaw water channel space with a cleaner
intended for that purpose.
•
Water has appeared on the tempered glass shelves.
Food items or dishes in the
refrigeration compartment are touching the back wall of the compartment. Do not let food items
or dishes touch the back wall.
•
Water has appeared under the appliance.
The thaw water collection tray has slipped off the
compressor. Place the tray on top of the compressor.
•
When the appliance door is opened, the rubber sealing gasket pulls out.
The gasket is
smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the groove for it with
warm water containing soap or dishwashing detergent and wipe dry. Put the rubber sealing
gasket back into the place.
•
High temperature in appliance, the compressor operation pauses are short.
Ascertain
whether the appliance door is shutting tightly, whether the door wasn’t kept open longer than
necessary when taking out or putting in foodstuffs, or whether a large amount of warm food was
placed in the appliance.
•
The top of the appliance has condensation on it.
The ambient relative air humidity is above
70 %. Ventilate the room where the appliance stands, and if possible remove the cause of the
humidity.
TRANSPORT
THE MANUFACTURER WILL NOT BE RESPONSIBLE FOR ANY DAMAGE TO THE APPLIANCE
THAT RESULTS FROM NON-COMPLIANCE WITH THE INSTRUCTIONS FOR
TRANSPORTATION.
•
The appliance should be transported only in the vertical position.
•
When being transported, the appliance should be protected from atmospheric conditions (rain,
snow, dampness).
•
The appliance should be firmly secured in place while being transported, to avoid slippage or any
shocks in the transport vehicle.
•
If the appliance was transported not vertically, it may be connected to the mains after 4 hours at
least. If this is not done, the appliance compressor may fail.
WARRANTY SERVICE
IF YOUR APPLIANCE IS NOT WORKING PROPERLY, ASCERTAIN WHETHER YOU CAN REMEDY THE
CAUSE OF THE FAULTY FUNCTIONING OF THE APPLIANCE YOURSELF. If you cannot solve the
problem yourself, contact the nearest refrigerator
service representative by telephone or in writing.
When making contact, necessarily indicate the
refrigerator model
1
and number
2
. You will find
this data on the product label, which is glued to
the left wall of the refrigerator compartment, near
the fruit and vegetable trays.
Summary of Contents for C 140
