10
7.
Before screwing the middle bracket 6 with the set of washers and spacers on the reverse side
of the cabinet, insert the bracket axle into the upper door;
8.
Before hanging the bottom door on the middle bracket axle, turn them over by 180
0
.
9.
Unscrew fixing screws 16 from both of door, remove handles 17 and fix them screwing in free
holes on the same side. Plate 14 remains in its place.
10.
Before screwing the bottom bracket 13 together with the set of washers and spacers on the
reverse side of a cabinet, insert the bracket axle to the door.
11.
Screw the bracket 15 on the reverse side of a cabinet.
D E F R O S T I N G
The refrigerator compartment defrosts automatically. Drops of ice that form on the back wall of the
refrigerator compartment thaw during the time the compressor is not working and the thaw water runs
down the thaw water runoff channel to the tray on top of the compressor, where it evaporates.
C L E A N I N G A N D C A R E
REGULARLY CLEAN THE APPLIANCE.
Remember that before cleaning you must disconnect the appliance from the
electrical energy supply socket by pulling the plug out of the electricity outlet.
•
Protect the appliance inner surfaces and plastic parts from fats, acids and sauces. In case of
accidental spills – immediately clean with warm soapy water or dishwashing detergent. Wipe dry.
•
Clean the appliance inner surfaces with warm soapy water. Dishwashing detergent may also be used.
•
Wipe dry inner and outer surfaces. Regularly clean the hermetic gaskets of the doors. Wipe dry.
•
REGULARLY CLEAN THE THAW WATER CHANNEL SPACE WITH A SPECIAL
CLEANER
8
FOR THAT PURPOSE (Fig. 1).
•
At least once a year clean dust away from the back part
of the appliance body and the compressor. A soft brush,
electrostatic cloth or vacuum cleaner may be used for
cleaning.
•
DO NOT use detergents containing abrasive particles,
acid, alcohol or benzene for cleaning the appliance inner and outer surfaces.
•
DO NOT use for cleaning cloths or sponges that have coarse surfaces intended
for scrubbing.
•
IF THE APPLIANCE IS TO BE LEFT SWITCHED OFF FOR AN EXTENDED PERIOD, LEAVE ITS
DOORS OPEN.
•
ATTENTION!
Outer of the doors – glass – clean with agents intended for glass cleaning.
R e m a r k s o n t h e a p p l i a n c e o p e r a t i n g n o i s e .
As the appliance operates
and goes through the freezing cycle, various noises will be emitted. This is normal and is
not a sign of any malfunction.
•
As the refrigerant circulates around the refrigeration system, it causes sounds like murmuring,
bubbling, or rustling.
•
Louder sounds like popping or clicking may be heard for a short time as the refrigerator
compressor switches on.
OPERATION PROBLEMS AND THEIR SOLUTIONS (TROUBLESHOOTING)
What if …
•
The appliance is plugged in to the mains but it does not work and the electricity supply
voltage indicator is not illuminated.
Check that your house electricity supply installations are
in order. Check that the plug is correctly inserted into the electricity supply socket.
•
The noise has become louder.
Check that the appliance is standing stable, on a level place.
To make it level, regulate the front feet. Check if the appliance is not touching any furniture,
and that no part of the refrigeration system at the back part of the appliance body is touching
