5
–
TO AVOID HAZARDS, DAMAGED POWER SUPPLY CORDS SHOULD
ONLY BE REPLACED BY THE MANUFACTURER, A MAINTENANCE
TECHNICIAN OR A PERSON WITH AN EQUIVALENT QUALIFICATION.
–
DO NOT USE extension cords or connectors (adapters), or hubs.
–
The frequency and power of the electricity supply must conform to the
general data parameters of the appliance as it is shown in the product label.
–
When positioning the appliance be careful that the electrical cord isn’t
squeezed in order to avoid its damage. Do not store heavy objects such as
cooling devices, furniture or other devices next the appliance in such a way
that they could squeeze and damage the electrical cord. This can cause a
short circuit and a fire.
–
Make sure that the plug of the electrical cord is not squeezed by the back
wall of the appliance or otherwise damaged. A damaged plug can be the
cause of a fire!
–
WARNING!
DO NOT OPEN THE COVER OF THE LED
ILLUMINATION. In case that LED illumination is used the service
representative must be contacted when the LED light is defected.
•
IF THE APPLIANCE IS UNPLUGGED (FOR CLEANING, MOVING TO
ANOTHER PLACE, ETC.), IT MAY BE REPEATEDLY SWITCHED ON AFTER
15 MIN
.
•
It is forbidden to use a technically damaged appliance.
•
The appliance can’t be disposed of by burning.
•
Do not place any switched on electrical devices (such as microwave ovens,
hair dryers, irons, electric kettles or other electrical devices) on top of the
appliance because this may cause ignition of plastic parts.
•
Do not place any dishes with liquids on top of the appliance and do not keep
flowers in vases or other liquid-filled vessels on the appliance.
•
Do not climb on or sit on the appliance, do not lean on or hang on the
appliance doors.
IF THE APPLIANCE IS OUT OF ORDER AND IT IS NOT POSSIBLE TO
REPAIR IT BY MEANS OF GIVEN RECOMMENDATIONS, UNPLUG IT,
OPEN THE DOORS AND CALL THE SERVICE EXPERT. ONLY A SERVICE
REPRESENTATIVE CAN REMEDY ALL TECHNICAL OR CONSTRUCTION
FAULTS
.
