Operator's guide:
1)Unpacking instructions
2)The handle
3)Round glass shelving
4)Grid shelving
5)Internal cleaning
6)External cleaning
7)Connection to the mains
8)Controls
9)Checking correct operation
10)Internal cleaning
11)Replacing the internal lights
12)Replacing the door's magnetic gasket
2)Cleaning the evaporator
3)Glass panel
Maintenance manual (Page 48):
1)Cleaning the condenser
4)Wiring diagram diagram of refrigeration unit
!
!
I
UK
D
E
F
NL
P
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO
6
Operator's guide
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
1
. Adults should operate this appliance only. Do not allow children to use the controls or play with it.
2
3
4
5
6
7
. It
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
installation of the appliance should be carried out by a qualified electrician or other competent person.
. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs.
. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
prior notice.
8
9
10
11
12
13
14.
Our products are for internal use only
–
do not install outside restaurants, shops.
. Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance
near sources of heat, such as radiators, stoves, etc.
. Keep the ventilation grills free from obstruction
for at least 30 cm.
. Ensure that the products displayed on the shelves and grills do not hang over the
edges.
. If damp air or products to be refrigerated should cause ice to form on the evaporator, we
recommend stopping the compressor and placing the goods in special refrigerated containers, kept at the
same temperature, until defrosting is completed;if this is not carried out the compressor will continue to
operate leading to a wasteful consumption of electricity and poor performance.
. If the appliance is not
working and unused, it is indispensable to keep the door open at least 30 cm.
Do not keep the neon
light up if the refrigeration is off.
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGE 1a
WOODEN CRATE 1b
2.
3.
4
5
6
7
2. THE HANDLE
1.
2
3
3. ROUND GLASS SHELVING
1.
2.
4. GRID SHELVING
1.
2
5. INTERNAL CLEANING
1.
2
6. EXTERNAL CLEANING
1.
Cut the strap and lift up the cardboard package.
Remove the nails from the wooden crate with care.
Insert the forks of a forklift truck between appliance
and pallet or crate.
Lift the appliance. . Remove the pallet or crate. . Place the appliance on a flat
and level surface. . Make sure there is nothing left in the package before disposal. . Separate the
packaging materials to facilitate disposal (see figure 1).
The handle can be found in a bag inside the appliance. . Fix the handle base to the door frame using
the two screws already inserted in the holes. Tighten with care. . Place the plastic insert over the handle
and press down until it clicks into place (see figure 2).
Take the shelves from the cardboard box and place them on the supports of the uprights.
First
mount the mirror shelf at the bottom (see figure 3).
The shelves are in the bottom of the cabinet. . Fit the grids into the height-adjustable supports (see
figure 4)
Clean the internal parts and glass panels, using soft cloths and neutral detergents. . Dry with a soft
cloth.
Use the same products as used for the internal cleaning.
PRISMA 400 TN/PG
PRISMA 400 TN/PF and PRISMA 400TB/PF
model
models
