23.590 – Plankton Pump for 6000 m – Ver. 3 - Manual
10
Maintenance
All parts of the plankton pump must be rinsed using fresh water. Regular cleaning with
fresh water is recommended and all moveable parts must be moved individually to ensure
all dirt has been removed.
Safety information
Disconnect power supply to avoid any unattended operation causing accident to
personnel and pump.
An expert maintenance technician fully familiar with the attendant hazards must only do
all maintenance, inspection and repairs.
When working on the unit in areas, which are difficult to access or hazardous, ensure to
take adequate safety precautions for the operator and others in compliance with the
provisions of law on health and safety at work.
Replace worn component with original spare parts.
Rev.: November 06, 2018 - lkj
KC
Denmark A/S
Research Equipment
Limnology
Oceanography
Hydrobiology
Holmbladsvej 17-19, DK 8600 Silkeborg, Denmark. Tel. +45 86 82 83 47
Bank: Sydbank. SWIFT: SYBKDK22 - IBAN DK5070460000104832
VAT no. DK 29 61 96 62
