23.590 – Plankton Pump for 6000 m – Ver. 3 - Manual
3
3
Connect the cable from the motor to the battery
cylinder, connector 1.
4
A is connected at top of the motor.
B is inserted into 1 on the battery cylinder.
You may secure the motor cable to the vertical bar
with 2 plastic strips, C and D.
5
The delivery includes a laptop with preinstalled
software.
Turn on the laptop.
Connect the USB cable from the laptop to the USB
connector on the battery cylinder.
Start the application via the icon on the desktop,
adding the requested data for start/stop etc.
Disconnect the cable and once you are ready to deploy
the pump, insert the 8-pins programming plug into the
battery cylinder. The plug is shown in front of the
laptop; please also refer to item 6, next pg.
Once inserted, the programmed session will start.
Deploy the pump.
