23.590 – Plankton Pump for 6000 m – Ver. 3 - Manual
5
10
The 4 zinc anodes, A, at the top will prevent corrosion
of the pump when used in salt water. Replace the zinc
anodes when they are eroded.
11
The pressure compensation, A, will compensate the
over pressure during the deployment. It is important,
to rinse the membrane A regularly with fresh water.
To extend life of the membrane please don’t expose to
direct sunlight for a long time.
The motor and the pressure compensation contains
Fluorinert FC-770 liquid. If you need to add extra liquid
please contact KC Denmark A/S for more information.
12
It is highly recommended, that the pump isn’t exposed
to direct sunlight for a longer period. The battery
cylinder and the motor will accommodate the heat.
Battery’s life will increase and the Fluorinert in the
pump’s house may expand, so it can break the
membrane for the pressure compensation.