KCC Co., Ltd.
www.kccpr.com
32
10
-
PNEUMATIC & HYDRAULIC
KTD-600 series
Digital Pressure Sensor Switch
Output Operation Mode
※
This product has 4 output operation modes (Mode 0~3) and an analog output mode. Use suitable mode in accordance to work. For more details about
output operation mode, refer to the graph below.
※
If the output mode is set to 0, there will have no output except the display of the applied pressure (Used as a pressure gauge)
※
Output wire classification
- Black wire : Control output 1 according to P-H/P-L setting value and output mode.
OUT1/ OUT2 LED will be ON
- White wire : Control output 2 according to P-H/P-L setting value and output mode.
OUT1/OUT2 LED will be ON
- Gray wire : Analog output
Pressure Output Mode 0
※
No Output
※
Using as pressure gauge
Pressure Output Mode 1
Pressure Output Mode 2
Pressure Output Mode 3
Analog Output
KTD-600 Mode (Compound Pressure)
Pressure
Mode
Pressure (Min.) ← Pressure (0) → Pressure (Max.)
Analog Mode 0
None
Analog Mode 1 1
±
0.1V ← 1.4
±
0.1V → 5
±
0.1V
Analog Mode 2 5
±
0.1V ← 4.6
±
0.1V → 1
±
0.1V
Analog Mode 3 1
±
0.1V → 5
±
0.1V
Analog Mode 4 5
±
0.1V → 1
±
0.1V
Analog Mode 5
0+0.1V ← 0.6
±
0.1V → 5
±
0.1
Analog Mode 6 5
±
0.1V ← 4.4
±
0.1V → 0+0.1V
KTD-600V Mode (Negative Pressure)
Pressure
Mode
Pressure (0kPa) → Pressure (-100kPa)
Analog Mode 0
None
Analog Mode 1
1
±
0.1V → 5
±
0.1V
Analog Mode 2
5
±
0.1V → 1
±
0.1V
Analog Mode 3
0+0.1V → 5
±
0.1V
Analog Mode 4
5
±
0.1V → 0+0.1V
