OPERATING THE ENGINE
3-3
Check Before Starting
CAUTION: If your machine is equipped with forward/
reverse selector switch (7), be sure to turn the switch in
the OFF position before starting the engine to ensure
safety.
1. If your machine is equipped with the battery disconnect
switch, check that the switch is in the ON position.
2. Check that both forward/reverse lever (2) and forward/
reverse switch (4) are in the neutral (N) position and
neutral lever lock (3) is in the LOCK ( ) position.
If your machine is not equipped with forward/reverse
switch (4), set only forward/reverse lever (2) in the
neutral (N) position.
NOTE: Unless forward/reverse lever (2) and forward/reverse
switch are in neutral (N), the engine will not start.
3. Check that parking brake switch (1) is in the ON position.
After the engine starts and checking indicator bulbs and
display (refer to page 3-5), check that the parking brake
indicator is ON.
4. Check that bucket control lever (5) and lift arm control
lever (6) are in the neutral (N) position.
1
2
3
4
7
7
4
5, 6
Fingertip Control Type
Multi-Function Joystick Type
6
5
Battery Disconnect Switch
MNEC-01-012
ON
OFF
MNDB-01-002
MNEC-07-001
MNDB-01-005
Summary of Contents for 70Z7
