OPERATING THE MACHINE
5-21
Removing Snow
WARNING: When operating a machine equipped with
ride control and the lift arm control lever in the float
position, when performing work as soil scooping, land
grading, or snow removal, be sure to turn the ride
control switch OFF. Failure to do so may allow the ride
control system to operate so that the front attachment
may automatically move up and down.
CAUTION: Remove snow in the same method as
employed in general loading work. However, pay
attention to slippage of tires traction and obstacles
that may be covered with snow.
Precautions for removing snow
y
Avoid sudden starting and stopping as well as rapid
steering of the machine.
y
Use tire chains on all four wheels.
y
Pay attention to the presence of the utility facilities such fire
hydrants, manholes, curbs, roadside drains, etc. The facilities
or the machine may be damaged.
Lifting Wheel Loader
WARNING:
y
Be sure to use lifting tools and set the articulation
lock bar in the LOCK position.
y
Never allow any person to ride on the machine to be
lifted.
y
Never allow any person to enter below the lifted
machine. Before fully lifting the machine above the
ground, check that the hooks are securely attached
to the machine and the machine is well balanced
while lifting the machine slightly above the ground.
Refer to the "LIFTING MACHINE" in the
TRANSPORTING section.
Lifting of the machine may be needed when loading the
machine onto a ship or truck for repairing and/or transporting.
M4GB-05-019
MNEC-05-001
Summary of Contents for 70Z7
