How to install
8
1.Fix the mounting plate
■
Mounting on concrete wall.
1.Remove mounting plate from product.
Taking the mounting plate by removing
the screws.
2.Firmly fix the bolts in the proper position.
·Determine the position on the wall and drill into the wall.
·Fit the bolts into the holes.
·Fill the holes with concrete.
·Install the mounting plate and check,
if it’s secured when the concrete solidifies.
※
Distance of bolt head away from wall
should be 13
～
15mm.
3.Fix the mounting plate with washers,
spring washers and nuts.
■
Please use the mounting plate provided
with product to avoid the dropping
caused by insufficient strength.
■
The wall should be constructed so
that it can support more than 5 times
of the weight of product. Ensure to
reinforce the wall when withstanding
strength can’t be confirmed.
Otherwise product may drop that
results in injuries.
Screw
Mounting plate
Mounting plate
Washer
Nut
Spring
washer
Mounting
plate
■
Other installation methods:
Mounting on steel hanger
M8 bolt
15mm below
Mounting on wooden frame
Wood screw
（Φ
8×60L
）
1.It’s prohibited to install the product on hollow wall, otherwise it may produce noises.
2.Conduct the necessary reinforcement, depending on the particular condition to avoid noise
resonance and vibration.
Concrete
About
Diameter
NOTE
CAUTION
Summary of Contents for FY-3009U1
